E-FLEX®-Floating Aerator

The floating version of the proven E-FLEX®-Aeration System for use in waste water ponds or basins where floor mounting and leveling is not possible.

Product Information

Membrane aeration systems are usually permanently installed or removed from the basin floor.

For cases in which floor installation is not possible or only practicable under difficult conditions, INVENT has developed the Floating E-FLEX®-Aeration System, the floating version of the proven E-FLEX®-Aeration System.

Compared to conventional floor-mounted aerators, the Floating E-FLEX®-Aeration System includes the following advantages and properties:

  • Use of the proven, highly efficient Floating E-FLEX®-Aeration System modules
  • Individual aerator chains cover a large area during operation and thus ensure efficient use of the entire tank volume
  • Leveling of individual modules is not necessary
  • Thanks to the use of floating air supply lines, installation is also possible when the basin is full
DesignstionValue
Amount of Air
15 – 100 Nm³/h/Module
Membrane Material
EPDM or Silicone
Frame Material1.4301 or 1.4571
Membranes per Module12
Aktive Membrane Surface1,2 oder 2,2 m² / Modul
Bubble Diameter1 – 3 mm
Pressure Drop50 – 100 mbar

Kirchzell, Germany

Plant: WWTP Kirchzell, Germany
Contractor: IB Walter und Partner GBR
Type of Plant: Municipal Wastewater Treatment Plant
Start-up Year: 2009
Application:

  • Aeration for BOD elimination

Scope of Delivery:

Colima, Mexico

Plant: WWTP Colima, Mexico
Type of Plant: Municipal Wastewater Treatment Plant
Start-up Year: 2006
Application:

  • Aeration for BOD elimination

Scope of Delivery:

Bräu im Moos, Germany

Plant: WWTP Bräu im Moos, Germany
Type of Plant: Municipal Wastewater Treatment Plant
Start-up Year: 2014
Application:

  • Aeration for BOD elimination

Scope of Delivery:

Lauenbrück, Germany

Plant: WWTP Lauenbrück, Germany
Type of Plant: Municipal Wastewater Treatment Plant
Start-up Year: 2014
Application:

  • Aeration for BOD elimination

Scope of Delivery:

Download product brochure

We would be happy to provide you with the desired document. Please enter your contact details in the form below.
You will then receive a link to the desired document by email.


    Fields marked with * have to be filled

    In our videos we introduce our INVENT Aeration Systems:

    Products and Team

    The wide range of INVENT products fulfills all process- and plant dependent requirements for biological wastewater treatment reliably and energy efficient.

    Aeration Systems for Modern Wastewater Treatment

    Applications of the INVENT E-FLEX®-Floating Aerator

    BOD or COD degradation

    Highly efficient supply of oxygen to the microorganisms for BOD and nitrogen elimination.

    The agitation and gassing system acts as a permanent aeration system for biological carbon degradation in aeration tanks. We can react flexibly to fluctuations in freight. The simultaneous circulation by the agitator ensures a homogeneous and deposit-free mixing even with low air supply in the activated sludge tank.

    Lagoon basin

    Highly efficient supply of oxygen to the microorganisms for BOD and nitrogen elimination in waste water ponds, lakes or lagoons with foil sealing.

    BOD degradation/nitrification in conventional activated sludge systems where floor mounting of the aeration system is not possible

    Highly efficient supply of oxygen to the microorganisms for BOD and nitrogen elimination in all aerated tanks where floor mounting of conventional aeration systems is not possible.

    Odor prevention in waste water ponds, lakes

    Efficient aeration in all cases where the introduction of oxygen is necessary to prevent anaerobic conditions and the resulting fermentation gases (H2S, CH4…).

    Do you have questions about our products?